IEC performs in-circuit and functional testing for production assemblies, as well as flying probe testing for quick-turn projects. Our capabilities also include Environmental Stress Screening with our ESS ovens.
 |
 |
|
|
In-circuit test of telecom equipment |
Functional test of computer peripheral equipment |
|
 |
 |
|
|
Environmental Stress Screening of PCB's for transportation industry |
In-circuit test of PCB's on production line |
|
IEC's test engineers are also experienced in RF. Previous projects have included satellite TV receivers in L-Band (DSS predecessor), wireless LAN based devices with GPS, CATV components, direct digital synthesizers of up to 8 Ghz and flextags used in measuring shipment efficiency. Test equipment utilized for RF projects include network analyzers, S-parameter test sets, spectrum analyzers, signal generators and transmission analyzers. IEC gives our customers a "Design for Testability Review". The goal of this checklist is to provide: the ability to electrically isolate during ICT; an electrically stable environment; and a high percentage of access for bed-of-nails.
In-circuit test capabilities
- Flying probe test
- GenRad Pilot (NY Technology Center)
- In-circuit test
- GenRad 228X, TS128L (7100 points)
- Teradyne 1880, 1890
- Usually mock-up
- Simulates end product
- Customer supplied
- PC controlled (IEC developed or CFE)
- IEEE-488 interface
- VXI interface
- PXI interface
- ESPEC ESS85-10JW
- Interior volume 85 cu. ft.
- Temperature range -200 C to 800C
- Temperature ramp per minute 150 C
- Comm. interfaces RS-232, IEEE-488
- Compressors 2x30 hp
- Heaters 150kW
- Blowers 2x10 hp
- Full load amps 316
- ESPEC ESS37-5JWC
- Interior volume 37 cu. ft.
- Temperature range -600 C to 1770C
- Temperature ramp per minute 100 C
- Comm. interfaces RS-232, IEEE-488
- Compressors 2x30 hp and 1x10 hp
- Heaters 55kW
- Blowers 2 x 10 hp<
- ESPEC ET34-10JW
- Interior volume 34 cu. ft.
- Temperature range -200 C to 1770C
- Temperature ramp per minute 150 C
- Comm. interfaces RS-232, IEEE-488
- Compressors 2 x 30 hp
- Heaters 50kW
- Blowers 2x10 hp
- Full load amps 110
- Tenney T30RC
- Interior volume 30 cu. ft.
- Temperature range -550 C to 1250C
- Temperature ramp per minute 30 C
- Comm. interfaces RS-232
- Compressors 1x10hp
- Heaters 5kW
- Blowers 1x3 hp
- Full load amps
- Blue M POM7-16BI-E/F
- Interior volume 36 cu. ft.
- Temperature range +300 C to 2000C
- Heaters 5kW
- Blowers 1x3 hp
- Blue M BTC80-EMPX-155
- Interior volume 80 cu. ft.
- Temperature range +300 C to 2000C
- Heaters 21kW
- Blowers 2x3 hp
- Thermodynamics Engineering 8219
- Interior volume 600 cu. ft.
- Temperature range +300 C to 2000C
- Heaters6kW
- Blowers 1x5 hp
